Air Purifiers

User Manual Honeywell HPA600B Professional Series True HEPA Air Purifier

Honeywell HPA600B Professional Series True HEPA Air Purifier

Honeywell HPA600B Professional Series True HEPA Air Purifier is a tool that can make your room healthier. This time we will share a Use Manual – Use Guide PDF that will help you operate this tool. And help you when experiencing operating problems.

User manual Professional Series True HEPA Air Purifier Honeywell HPA600B

CLEANING MESH PRE-FILTERS

The mesh pre-filters trap and capture larger airborne particles that enter the intake grilles. It is important to keep these clean to optimize airflow into the purifier and trap the larger debris before it reaches the HEPA filters. These pre-filters can be periodically removed and shaken or vacuumed clean. Alternatively, they can be rinsed by hand under warm water to clean. Let the pre-filters air dry completely before inserting them back in to the air purifier. The pre-filters should be cleaned every 3 months.

To access the mesh pre-filters, you will need to remove the two HEPA filters. Power OFF and unplug the air purifier. The mesh pre-filters are located on each side of the air purifier at the air intake. Grasp the plastic tab(s) for removal and gently pull inward and out of the unit clearing the metal retention tabs. To replace clean (and dry) pre-filters, simply return them to the same location and set them in place by securing them behind the metal retention tabs.

CLEANING THE PARTICLE SENSOR

The Particle Sensor is an important feature of your air purifier and is located in a compartment on the right side of the air purifier above the air intake grille. It is recommended that the particle sensor be cleaned every 3 months to optimize performance. Use your thumb to open the Particle Sensor Door and use a dry cotton swab to clean the three openings shown of any debris (see Fig. 5). DO NOT use any cleaners or liquids.

See also  Manual General Electric ADEL70LRL1 Dehumidifier

CLEANING AND STORAGE

We recommend that you clean the air purifier at least once every 3 months and before extended storage. Use only a dry cloth to wipe the external surfaces of the air purifier.

DO NOT USE WATER, WAX POLISH, OR ANY CHEMICAL SOLUTION.

If your Air Purifier will not be used for more than 30 days, we recommend that you:

  1. Remove the 3-in-1 HEPA Filters from the unit.
  2. Wrap the Filters in an airtight plastic bag for best storage

Above is a small snippet of the contents of the Honeywell HPA600B Professional Series True HEPA Air Purifier manual book and user guide. This user manual is in English and Spanish. To see more details, please download the link below.

Leave a Reply

Your email address will not be published. Required fields are marked *