Coffee Makers

User Manual Keurig K-Mini Coffee Maker

Keurig K-Mini Coffee is a tool for making coffee that many people use. This time we will share the Keurig K-Mini Coffee user manual. We will also write down some of the guide summaries contained in pdf files.

Before You Brew

1. Plug & Power
Remove packing tape from brewer. Pull plug and extend cord from cord storage located at the back of the brewer. Plug into a grounded outlet.Press the power button. The powerbutton will illuminate.

2. Fill & Place
Add 1 cup (8oz) of water into a mug. Lift the water reservoir lid and pour the water into the reservoir. Do not fill past the MAX or below the MIN fill lines. Lower the lid and place your mug on the drip tray. NOTE: Do not use distilled water

3. Lift and Lower
Lift and lower the handle. Do not insert a K-Cup® pod. The brew indicator light will flash to indicate that the brewer is ready.

4. Cleansing Brew
Press the brew button. The brew indicator light will illuminate solid, then begin to pulse while thebrewer is heating. After about 2 minutes, the brew indicator light will illuminate solid again and the water will begin to dispense. Pour the hot water into the sink. The one-time setup process is now
complete and you are ready to brew!

Brew Your First Cup

5. Fill & Place Mug

Add desired amount of water into a mug (6oz minimum, 12oz maximum). Lift the water reservoir lid and pour the water into the reservoir. Do not fill past the MAX or below the MIN fill lines. Lower the lid and place your mug on the drip tray.

See also  Keurig K-Mini Coffee Maker Single Serve K-Cup Pod Coffee Brewer User Manual

6. Lift & Place Pod

Lift the handle. Place a K-Cup® pod in the K-Cup® pod holder. Lower the handle completely to close the lid. The brew indicator light will flash to indicate that the brewer is ready. Do not remove the
foil lid on the K-Cup® pod. High Altitude Brewing: While holding the brewer handle up, push down slowly on the K-Cup® pod in the pod holder until the bottom of the K-Cup® pod is punctured by the exit needle.

7. Brew & Enjoy!

Press the brew button. The brew indicator light will illuminate solid, then begin to pulse while the brewer is heating. After about 2 minutes, the brew indicator light will illuminate solid again and the beverage will begin to dispense. Brewing is complete when the brew indicator light is no longer illuminated. When complete, lift the handle and dispose of the used K-Cup® pod.

CAUTION: While brewing, there is extremely hot water in the K-Cup® pod holder. To avoid injury, do
not lift the handle during the brewing process.

Brewer Features

Auto Off: Automatically turns your brewer off 90 seconds after the last brew for energy savings. Cord Storage: Makes transporting your brewer convenient and keeps countertops tidy. Travel Mug Friendly: Remove the drip tray to accomodate a travel mug

Caring for your Brewer

Brewer Exterior

Keep your Keurig® brewer looking its best by cleaning the exterior from time to time. Just clean with a damp, soapy, lint-free, non-abrasive cloth. Never immerse the brewer in water or other liquids.

Drip Tray

The drip tray can hold up to 8 ounces of overflow and should be emptied and cleaned occasionally. To remove, slide it toward you, keeping it level to avoid spilling. Rinse and clean with a damp, soapy, lint-free, non-abrasive cloth.

See also  Manual Mr. Coffee FTX41-RB Coffee Maker

Water Reservoir

The water reservoir should be cleaned periodically by wiping the inside of the reservoir and underside of the lid with a damp, non-abrasive, lint free cloth. Do not dry the inside of the water reservoir with a cloth as lint may remain. Allow the reservoir to dry completely.

That is a little summary of the Keurig K-Mini Coffee Maker manual. To see more details, you can download the pdf file below.

Leave a Reply

Your email address will not be published. Required fields are marked *